Wyze pan cam blinking blue and orange light

what to do my my wyze pan cam wont work anymore just blinking blue and orange light

Welcome to the Forum @var.bolivar69!

Here is some information regarding your light status from the LED Status Light Indicator Knowledge Article.

Flashing yellow, yellow and blue, or blue

Note: The same troubleshooting steps will be taken if the status light is flashing.

  1. Power cycle the camera by unplugging the power and plugging it back in.
  2. If the camera returns to flashing yellow but never reconnects, set the camera up as a new device.
  3. On the Home tab of the Wyze app, tap the + plus sign in the upper left, then select “Add Device” . (This can be used to re-setup a camera as well) This will initiate the setup process for the camera. Follow the prompts on the screen to setup your camera again.

If these steps do not work you may need to try to manually flash the device. See section 2 for the Cam Pan

Re boot your wifi system,power cycle all devices,sign out of app then back into your app,y might need to re configure the cams