Hooking up my thermostat and hoping to control both my ventilation (powered damper) and humidity (flow through) the app tells me to label the v wire as “n/c”. Maybe v is the wrong label. Anyway I’m going to use the orange wire to connect to the vent damper and blue to the solenoid on the humidifier. Which terminals should these go in?
I think I figured it out. Can’t control both from the thermostat. I’ll use the ventilator control through wyze and control the humidifier with a separate sensor at the furnace.
V is not the vent terminal. It is another 24v line I think.