Wyze Video Doorbell Firmware 4.25.1.060 Released! - 4/27/22

Well. Don’t work on the damaged one. I have two doorbells, one was upgraded to 042. It then had the 3/3 problem. Then upgraded to 060, initially it was better. Now it is back to the same problem.

The other doorbell was not upgraded to .042 firmware. But now it is upgraded directly to .060. it works fine. No problem what so ever.

So chances are the the .042 update messed up something in the device storage that the .060 did not clear up.

I restarted the bad one several times. No help. I tried to avoid resetting the doorbell until this can be confirmed.

Oh man. Wyze. You messed up big. It’s been a month and we might have to wait another month for an update that might not work.

2 Likes

Same problem here, stuck on 3 of 3. This is happening on both of my Wyze Doorbells making them essentially unusable.

I have a Unifi network with 3 AP’s in an 1800 sq ft house so it’s not a signal strength issue.

1 Like

Wyze stop releasing new stuff and focus on fixing issues caused by your updates.

3 Likes

Same issue here, the doorbell is unusable ´:-(

This issue was reported and acknowledged on the latest iteration of Fix it Friday for action by Wyze. They are requesting logs. Suggest all affected follow the link to the Wyze post and supply the requested info in reply.

Would like my Wyze Door Bell to send notification to Alexa when someone ring it

[Mod Note]: Your request was moved to this category for better visibility. Your request is satisfied by existing functionality that may currently be inoperable.

Welcome to the User Community Forum @hien_chu.

This functionality does exist. There are currently some issues going on with the interoperability of the Alexa App and the Wyze skill, so I am not sure if it affects this function. It may only be affecting routines. However, Wyze and Amazon are working on fixing it.

When it does work, you can enable the function by:

  1. Enabling the Wyze Skill in the Alexa App
  2. Adding the Doorbell Cam from Wyze as a device in Alexa
  3. Opening the Doorbell Cam device in Alexa
  4. Enabling the “Doorbell Press Notifications” toggle.

Hope this helps! Good Luck! :crossed_fingers:

EDIT… In that page you can also set the Alexa devices that will announce the press and the sound you hear as well as person notifications if you want them.

1 Like

Hi

Thank you for your reply. Sorry for not being clear. I was looking for an option for the Wyze Video door bell to send the video to Alexa when someone rings it

Thanks

Hien

1 Like

Ah yes… Something different. A function I do not use. But, there are some @Mavens who have the Video Alexa devices and the Video Doorbell. Perhaps they can provide some insight.

Here is the routine I built in Alexa.

When the front door bell is pressed, it’s just a voice command written (Add Action>Custom) in to the routine to call up the camera on the Alexa device or devices of choice.

5 Likes

I did the same thing as R.Good with my Video Doorbell. As he showed, you just do a custom command with Alexa and it acts as if you told Alexa that command verbally.

For a while I even set mine up so that it would automatically stream the video doorbell as soon as it detected a person, even if they didn’t press the doobell button (I had cam plus on it, but a person could even just have it automatically load the video even with just motion).

2 Likes

Well, for whatever reason my Wyze Doorbell (non-pro) is showing that I have the latest firmware version 4.25.1.042 but I know that the latest version is 4.25.1.060. How can I get this Updated? Any suggestions? I have tried to reboot the doorbell also no go.

1 Like

Welcome to the User Community Forum @helio4k!

Where is it telling you that it is up to date? I am currently on 4.25.1.042 with the 4.25.1.060 pending in my Firmware list (which I won’t do because of users reporting problems)

FW Updates are listed in Account>Firmware Update

This is what I see in both Firmware Update and in the Doorbell Firmware option

1 Like

1 Like

Don’t bother upgrading. I’ve been on 4.25.1.0.60 since it came out in beta. It’s still broken with the doorbell stuck authenticating 3/3.

It’s garbage. Don’t bother.

3 Likes

So true @DHCR, same here, still bugging, stuck at 3/3. The doorbell is unusable :rage:

2 Likes

I have no answers for you. There aren’t any indications that the .060 was halted. I’m not going to update for the reasons stated by @DHCR and @adel_bouchiba although .042 was reported to have introduced the 3\3 problem and .060 was supposed to have fixed it.

I am on .042 but have never been affected by the 3\3 problem.

It is my suspicion that .042 and .060 are incompatible with the newer app versions and cause the 3\3 issue, which is why I haven’t experienced it. I am on an older App version Android 2.30.0.130

For those affected with 3\3, it might be worth a try to roll the app back to see if it helps since there is no way to revert the FW.

1 Like

Thank You all for responding, I like Wyze products but it seams that they are stretching tin with all those new product launches and forgetting to fix other older products by providing quality firmware fixes.
Cheers

1 Like

Note on the 060 FW, someone here posted that if you set the doorbell to use nightvision all the time that the 3/3 issue wouldn’t happen.
I can confirm that also works for me. So, the doorbell is at least usable, but only if it’s set to black and white.

2 Likes