Wyze Switch - Product Ruined by Fragile Connection Terminals

[Customer]

Sigh. Seems like a defect all right.

Beware: Wyze Switch Terminals are weak

The wire screw terminals for Line, Load & Neutral on the Wyze switch are very weak. Installers can remove the switch face by unscrewing the 4 torx size “6” screws. Then the switch face easily pulls off. Pre-install your own 3 wires by 1st griping the square terminal base with pliers before tightening down the terminal screw. Then reattach the face and install into the house electrical box. This will solve a lot of headaches.

Provide pre-installed wires on the Wyze Switch

The wire screw terminals for Line, Load & Neutral on the Wyze switch are very weak. When tightening the screw, the terminal base too easily pulls loose from the internal mount and makes the switch inoperable. Adding pre-installed wires would solve this issue and make the switch more robust. The wires would attach to existing house wiring with simple wire nuts. Although this is not as much an issue for the ground terminal it would be simpler and consistent to pre-install a ground wire as well…