Wyze sprinkler controller and Hunter rain sensor

[bwasserman1]

I have just replaced my 13 year Hunter SRC controller with a Wyze sprinkler controller. It works great. However, when I wire in my Hunter rain sensor to S1 and VAC {-} the controller skips every schedule saying sensor skipped.

My Hunter controller has never, in many years, skipped a water schedule because of the sensor. I think the sensor is not working properly.

The wiring for the Hunter controller has 2 wires one going to the valve common the other to RS input. The Hunter documentation indicates that the switch is normally closed unless activated.

Is the Wyze controller looking for a normally open switch input from the inactive rain sensor?

Thank you

Bernie

[SergL]

Very little documentation on the Wyze side for this product, for now I would try swapping the two leads wires.

[Why-me100]

I am having the same issue. Did reversing the wires help?

[bwasserman1]

Never got it to work. I no longer use it

[lloydnivy]

Can't get sprinkler schedule to work

I’ve had the same issue and it’s been like this for over a year! I contacted Wyze support to get the Sprinkler Plus canceled thinking that it would fix the issue. Unfortunately, it didn’t fix the problem. I even unplugged my rain sensor to see if that would fix it but still the system SKIPPED my schedule. Follow these steps to fix the issue: [IMG_1356] -Click the gear icon -Tap on System -Tap on Sensor 1 and/or 2 Just make sure to set the Rain Sensor to “None” That’s it! Your unit will …