Well, While connecting my camera a firmware update appeared, so… i updated and after reaching about 90% update failed, now im stock with a camera that has a green ligt all the time, it does not show up im the app, and i have spent almos 10 minutes pressing the little reset button with no effect at al, the green light does not change, the camera does not have an sd card inserted.
Now, what can i do?
Thanks in advance
If the camera is bricked, you should be able to fix it if you have an SD card.
That should give you a “.bin” file. Rename it to “demo.bin”.
Put that demo.bin file on the SD card in the root directory.
Power off your camera, insert the SD card.
Hold the setup button, plug in your USB cable, keep holding the setup button for 3-6 seconds.
Once the light is solid blue, release the button and wait for 3-4 minutes. The camera will reboot and change light status during this time.
After it is done, your camera should be functioning again.
I am having trouble with this process. I have the demo.bin file on an sdcard, and have it inserted in the camera. I push and hold setup while plugging it in. The blue light comes on, but the yellow stays on, as well. I release the setup button after the blue light comes on, but nothing happens (waiting 10-15 minutes)
The model number is Wyzecp1.
Thanks,
