Wyze cam v3 stopped recognizing wyze lamp socket as acceasory

[spamoni]

Sometimes, you can remove the lamp socket from the lamp or remove power from the lamp, then go into the app and clear the cache. This is located in account App Settings. Note: This will clear all thumbnails for your cameras, but when you live stream again, they will return.

Then go to the camera, Device Settings and select restart from there, to ensure the camera has been restarted after clearing the cache. Then go back to the app and add the power back to the lamp socket and see if it is recognized and usable.

Also, you can try to set it up again and see if it is found:

Wyze Lamp Socket Setup Guide

Here is a link someone posted:

Wyze Lamp Socket not recognized

I was able to fix the issue by shutting off the switch to the lamp and using a pair of needle-nose pliers to pry up the socket tab which was almost completely flattened. Once I had raised the tab, and screwed everything back together, I turned on the switch and everything came on properly.