V1 cam seems to have bricked during last firmware push

support

#1

Well, not totally bricked but will no longer connect to the net. So…pretty much bricked. Get a bind timeout error after it reads the QR code.

Did a hard cam reset ( 20 seconds on the tab), router reset, cam power-off, removed the microSD card, you name it and it still will not connect. Error is repeatable. Worked fine before the last firmware push.

Cam ends up with a blue / yellow flashing status light and a bind error message.

Suggestions?

Support ticket - 36833


#2

You could try re-flashing your firmware as per instructions here:

https://www.wyzecam.com/forums/topic/flashing-your-wyzecam-v1-firmware/

Try FIRMWARE_660R_F_3.9.1.102 first.


#3

Geeeeenius.

That did it. Back online and happy.


#4

Glad to help.