Sunset, sunrise (dusk, dawn) trigger for shortcuts

Have an option on scheduling for sunrise or sunset instead of a set time. It could easily be calculated based on night vision activation or deactivation from prior days. Maybe even call it something associated with night vision. This could be helpful in many situations. One example would be for those suffering from headlights. When night vision is activated is when headlights come on, so then users could turn motion detection off, and on again when night vision deactivates.

I setup notifications during daylight using Weather Underground’s triggers in IFTTT.

My Wyze cam v2 is outdoors, and at night, the passing cars trigger the motion

1 Like

Not sure where you conclude “most of us that view the outside world do so thru glass”? All of my cameras are outside and Amazon sells many different models of outdoor housings for these cameras. The mic, speaker and IR lights serve no purpose through glass.

Anyway, Wyze could also base it by time zone although it would not be as accurate. I have timers that have sunrise and sunset features that are very handy, so there are other ways to go about it.

There is a feature in beta testing now that will allow you to disable IR emission for the V2/Pan cams. That will probably make this a moot point for cameras behind glass.

1 Like

Disabling IR emission will not stop car headlights from triggering alerts, so still would like to see a sunrise/sunset option to the alert schedule.

1 Like

I’d like this, too. I have a Wyze camera inside a bay window, pointing outside across the front porch. I have turned off the IR lights. At night, the camera just sees the reflection on the window from inside, and I don’t need alerts on me walking into the kitchen, for example. It would be nice if we could disable motion detection when night vision is on. That way, the camera doesn’t need to know sunrise/sunset. I suppose the scheduled time works okay, but one would have to modify it periodically to adjust for changing sunrise/sunset.

Vera (home automation) uses postal codes as the trigger for sunrise/sunset. For example you can set it ON at sunrise or minutes/hours before/after sunrise then OFF at sunset or minutes/hours before or after sunset. Have had our lights using this for past several years -works great!

Give Wyze bulb ability to check local sunset times, and turn on accordingly. And then turn off at a pre-set time. “Insteon” has that ability.

How to do this with IFTTT.