I am hoping others can verify this as well. Here is what I seem to be experiencing.
In the past, there was an issue where when an SD Card was formatted, nothing changes visually, it will still show the usage as it was before formatting. I tested this and it does move it back to 0 as expected now, not sure when it was changed or fixed. However, I was also trouble shooting the load issue with the V3 Camera where they get hung up on step one or step three. If the app is shut down and then started again, it will come up when you select the camera to stream. In addition, if you live stream other cameras and then go back it seems come up, most of the time. So here is where I tie this all together:
- The v3 camera which never suffers from the load issue does not have an SD Card in it. and it loads the live stream quickly.
- The other 5 camera’s, which has an SD card seems to take a longer to load the Live Stream and seems to be experiencing the loading issue.
- I had 2 camera’s with the SD Cards about 90%. These Cameras seemed to be more consistent with the loading issue. I then formatted the SD Cards and tried again and they seem to load faster now, not as fast as the one without the SD Card, and seems to be able to load the Live Stream without the hanging.
Here is what I am asking, if someone is having the hanging while trying to start a live stream and you have an SD Card in it, either remove the card and turn off the SD Card option or format the card and try again. Curious if others have the same results as me.
If that is the case, I believe it is delayed as it is trying to load the SD Card in the timeline in the event you want to see the Playback Video’s. Just a thought.