After the release of the outdoor camera, I ordered one and tried it out. It worked great so I tucked it away for future project. Recently I started that project and ran into a problem. Originally I had connected the bass Station to my main EERO gateway mesh router. Now I needed connected to one of the other routers closer to where the project would be used. I get the message that the base station is connected to a different account. (I have a couple and used one I only use for testing) and I can’t seem to figure out how to clear that and start over. I’m not sure if the problem is it has to be on the Gateway router where are originally tested it, or it just needs to be cleared to set up for the new location router.
Any ideas what I should do?