Wonder how this is going to happen. I’ve been assuming there is a secret phone home kill switch in ALL the old firmware that will accept a forced update. But maybe there just isn’t? Maybe my old, old firmware will stay untouched (as the RTSP variant reportedly will) and will either (a) stop working or (b) just keep working? I almost never run the actual app - the only recent exception was when one of my bulbs decided to forget its identity after a brief fixture cleaning removal.
Okay okay. Maybe the terminally unfunny couple in the poorly written new ads are an improvement after all.
I have two theories. Certain generations have never experienced societal stability so they doubt its concrete existence. Disrupting something relatively stable is a service to humanity because entropy. Stock comedy has become parody of parody of parody ad nauseam. So gaseous from the get-go. Unsatisfying.
Pass the absinthe.
I went with firmware version 22.214.171.1241 which is latest firmware that is not currently paused. I installed the firmware from SD card onto 9 cameras without issue. All nine seem to work okay. Now why does the app prompt for firmware update when the newer two firmware versions are paused due to IA issue?
Well done! (no irony whatsoever)
I will follow your progress with interest.
Good citizen voluntary disclosure:
126.96.36.1998 (September 8, 2021)
188.8.131.52 (January 26, 2022)
People who aren’t even trying:
Peeposterous! We’re watching fellas like you now so mind your pints and quarts…
First assumption - secret phone home kill switch on ALL old versions - proved correct. I got hit, and one of my cameras did not make it out alive. I won’t be climbing up in this winter weather to rescue it any time soon. Power pull didn’t help so it seems Wyze bricked my camera.
The other V2s got upgraded and stayed alive although they haven’t improved at all. Notifications still take 30+ seconds, same unstable WiFi, same broken SD card support. Sigh.
Thanks for the update, bub.
Seven days on, still good performance, @OldSWEngr ?
Stupid question: Is the camera still under warranty? If not, do you think Wyze will replace it since their firmware bricked it? I’m not optimistic that they will. Want a $5 credit towards a new V3?
Dunno, probably not. No way. Me neither. No thanks.
I’ve got an unused 2-3 ft. drill bit itching to help run some Cat 5 though.
Yes, no problem with 184.108.40.2061 on my v2 cameras. I don’t has an SD card in any yet so cannot comment on function of that. I just discovered that I have not yet updated firmware on one v2 cam at another address. It is still on 220.127.116.11. I’ll update that one to 18.104.22.1681 soon.
Update: It’s alive!!
The camera came back all by itself. Must have gotten wet maybe. Strange coincidence since none of my outdoor cameras have ever died this way and come back. (One died period.) Sorry then, Wyze?
The nuanced reality emerges:
And you’ll note that was addressed in the very first of my Unanswered Upgrade Questions of 2022 in that very thread:
Are you haveing a senior moment?
Now that is thick irony indeed.