Pan Firmware Upgrade Fails

Have tried multiple times to do firmware upgrade on my Cam Pan from 4.10.5.98 to 4.10.5.111 but it fails every time. Any suggestions?

Thanks

1 Like

A couple users tried manually flashing to the previous version, the one before .98, and then upgrading to .111 and it worked. I had to do the same when upgrading to .98.

1 Like

Every now and again I have a camera fail to upgrade. When it happens I have had good luck doing the following.

  1. Turn off all event and SD card recording.
  2. Turn off any time lapse recording.
  3. Turn off Motion Tracking and Pan Scan if it’s a Pan Camera.
  4. Format the SD card, or remove it.
  5. Physically unplug the camera for at least 1 full minute.
  6. Restart camera and immediately do the upgrade.

Keep in mind the camera needs a solid WiFi connection to upgrade successfully so if the connection is weak move the camera closer to the WiFi source.

1 Like

Thanks for the suggestion but I’m afraid it didn’t work.

1 Like

Thanks. So how do I manually flash? And if I did that why wouldn’t I just try to manually flash .111?

The link below tells you how to manually flash fw. A Wyze developer would have to answer your second question.

https://support.wyzecam.com/hc/en-us/articles/360031490871-How-to-flash-firmware-manually

1 Like

The .111 firmware would need to be released in a file like the other previous firmware versions. See the release notes page like linked above this and see which firmware versions are clickable, looks like those are the ones available to download and manually flash. Right now looks like all past versions, not the current version is up for download

1 Like