Notification for power failure

Hello, I have Wyze cam v3 , I wanted to ask if by any way , if anyone turned the power off for any reason, like he/she doesn’t want to be caught by the camera, is there any chance that the app on my iPhone notify me that “ power turned off on your camera “ !! So I’ll be aware that there’s some unusual thing happening.

Welcome to the forums! There is a current wishlist topic that requests this feature. Give it a vote to help it along!

In the future please search the wishlist section to see if something isn’t already there for a feature request. Thanks in advance!

2 Likes

More involved than you think. First of all, the camera has to have battery backup (separate from the normal USB power source) so that it can report a failure. Next, your WiFi needs to have backup power. Next all pieces of your internet (routers, switches, modem, etc) needs backup power so that it can stay up in order for the phone to be able to send the message. You do have control of al of those (except the camera), however what you have no control of in most cases is your internet service. If an outage affects more than your house, you may find that your ISP looses power to something in between their office and you. For example, ANY time there is an area power outage near my house, my cable based internet fails instantly.
Now if all you are looking for is an ability to be notified any time your camera looses connectivity to the Wyze servers, you really don’t want that many notifications. Unless you set the delay (in other words how long an outage must last before notification) for a fairly long time, you will be amazed at how often there are short duration signal drops.

Most of that isn’t really necessary. All you need is for your app (or, better, a Wyze server) to periodically page the device, and report if it has been unresponsive after X pings / seconds / minutes.

1 Like

That was what my second paragraph said.

1 Like

Rather than wait forever for a request to Wyze, like dark modes simplicity in coding but Wyze being to busy with their next product release…

This is a ready to go solution…
Power Failure Detector with text & email

You will need a battery backed up router/WiFi for this to work

And you’re still dependent on your internet staying up during a power outage.

And my last sentence states that requirement :stuck_out_tongue_winking_eye:


I do it a different way with a script running on my FirstNet Router that uses the I/O port on router connected to a wall transformer/relay. When relay trips the I/O port script sends SMS from modem.
And it has a 21 hour battery currently:
Battery Backed-Up 14 V3 cams and Internet Communications

Thanks for replies. But , if we think simply about it , maybe someone just unplugged the cam , came from an angle that is not covered by the cam , do whatever wanted to do , after that turn it ON again, in this case , I’ll never know about what happened, unless there’s something like the “ ping “ between the cam and the Wyze server, so that when the cam been unplugged, the send-receive with the server will interrupted and so send a notification to the phone app

Here’s the problem with that. If you set the timeout for the Wyze server to send you a notification based on a hearbeat failure (can’t use ping) short enough to be useful, you will be inundated with notifications. If you set the heartbeat failure long enough so that it is not constantly notifying you of outages, it will not be overly useful.

I think anything around 30 seconds or higher would be fine.