If it’s on the network, but not connecting out, I’d check to make sure that ports arn’t being blocked. There is also a .200 subnet issue, I’ll try and edit in a link to another thread about it.
Some light reading about similar issues. Check these out and see if any information within can help you.
I bought 2 early access Outdoor cams (accidentally based on website at time). I am having the exact same issue with both. I can get the bases connect (but sometime they fail back to blinking). I can not get either camera to connect to their base. Sync fails every time.
I did update the firmware on the base station (both), but obviously can’t update the firmware on the camera, unless someone knows a manual way. I am concerned this might be the issue?
The only other idea I have is there is …
Can’t connect Base Station. Constant blue blinking light.
iPhone & base station on same network.
Upgraded Iphone firmware to latest.
Base station not appearing in my device list to be able to check firmware.
Currently have 2 additional Wyze cams and the watch listed and up to date.
Tried unplugging and restarting from router multiple times.
Tried depressing the reset on the base station and rebooting no luck.
Couldn’t get the QDR to scan from bottom of base station.
Tried to set up thru …
2 Likes