I cannot get the v2 to accept the micro sd card

I cannot get the micro sd card in the v2

 

What happens when you try?

 

It feels like it is not seating properly

 

also when I go to time lapse or playback, I get no sd card installed

 

It only goes in one way. If it’s not going in very far, then flip it around.

If it’s going in most of the way, then that’s not the problem. You may need to use the end of a large paperclip or something similar to push it in until it clicks. Some cameras have shipped with the card mechanism already in the engaged position. In this case, you need to push the card in until is springs back, which should reset the mechanism.

Ok solution is simple. You push the card in gently first. the label side of the SD card faces the camera. Then use a car key or house key to push in the flat surface of the SD card that is sticking out till you hear the “click” that it is seated. It worked for me.

Got the solution from this Youtube video: FIXED! SD Card Won't Snap in Place or Stay In? TRY THIS!! - YouTube