I’m attempting to flash the demo.bin to a V2 cam with current version 220.127.116.11 firmware.
Have loaded demo.bin (demo_V2_RTSP_18.104.22.168.zip) onto a class 10 16GB micro sd card and renamed the file to demo.bin
Holding the setup button while plugging in the power, the yellow light turns the expected solid blue/yellow and I release the setup button. The light remains solid blue/yellow, then cycles off and comes back to a flashing yellow light.
It has been flashing yellow now for a good 15 minutes.
The card has been formatted prior to copying the demo.bin file to it.
I’ve been through this process 3 times now with the same results.
Any insight and advice greatly appreciated. Thank you!