connecting through access point?

support

#1

is there a way to connect through an access point from my Bridge mode Mesh system.

had to connect to my weaker 2.4 ghz network


#2

Wyzecam only works on 2.4GHz wifi. If your mesh system is 5GHz only, then you cannot connect the Wyzecam to that.


#3

Larry,
Wondering which mesh system you are using.

I am also using a mesh network at home with a mixture of 2.4 only and dual band access points. I found that if a camera attempted to connect to an A/P that was 2.4 GHz only, it would work, but if it attempted to connect to an A/P that was dual band, it would not. I ended up creating a dedicated SSID that was locked to 2.4 GHz and then it worked all the time.
BTW, I’m using an Open-Mesh network. Very happy with it.


#4

My deco M5 is both , but , I couldn’t connect

through it , unless, I used my regular 2.4 router network

i will have to give it a try, I assumed it would connect automatically!!